Equipment Database

  • Our searchable equipment database is designed to provide specific information on Core Labs instruments.

  • List Url
  • Page Size

Search equipment by core lab Select from the below dropdown boxes, and then click 'Search'

  • Core Lab *
  • Service Area
  • Lab Area

Total equipment found: 24

  • Analytical Chemistry Core Lab
    Solid Phase


    ASAP 2020_acl

    Determination of specific surface area, pore volume and pore size distribution, using nitrogen and argon at liquid nitrogen or argon temperature. Three different types of samples can be measured based on pore sizes: a) mesopores - from 2nm to 50nm; b) micropores; and c) mesopores - from 0.35nm to 50nm. This instrument can also perform chemisorption analysis to measure active metal surface area, metal dispersion and active metal particle size. Six samples can be run simultaneously. 


    Sample - solids, powders or polymers. Quantity to be discussed with lab scientist.​


    Manufacturer: Micromeritics
    Model Number: ASAP 2020
    Location: Building 3, Level 3 East

  • Analytical Chemistry Core Lab
    Solid Phase


    ASAP 2050_acl
    Determination of specific surface area, pore volume and pore size distribution using liquid nitrogen or argon (and temperature controller from -30 to 150 °C) for mesopore samples with pore size from 2nm to 50nm. This instrument can also perform high pressure adsorption (up tp 10 bar) using CO2, H2, CH4, etc.

    Sample - solids, powders or polymers. Quantity to be discussed with lab scientist. ​


    Manufacturer: Micromeritics
    Model Number: ASAP 2050
    Location: Building 3, Level 3 East

  • Analytical Chemistry Core Lab
    Solid Phase


    ASAP 2420-1_acl

    Measurement of specific surface area, pore volume and pore size distribution using nitrogen gas, argon or krypton at liquid nitrogen or argon temperature. There are three different samples that can be measured based on pore size: a) mesopores with pore size from 2nm to 50nm; b) micropores; and c) mesopores with pore size from 0.35nm to 50nm. The machine can run 6 samples simultaneously.​


    Sample - solids, powders or polymers. Quantity to be discussed with lab scientist. ​


    Manufacturer: Micromeritics
    Model Number: ASAP 2420
    Location: Building 3, Level 3 East

  • Analytical Chemistry Core Lab
    Solid Phase


    ASAP 2420-2_acl

    Measurement of specific surface area, pore volume, and pore size distribution using nitrogen gas, argon or krypton at liquid nitrogen or argon temperature. There are three different samples that can be measured based on pore size: a) mesopores with pore size from 2nm to 50nm; b) micropores; and c) mesopores with pore size from 0.35nm to 50nm. The machine can run 6 samples simultaneously.


    Sample - solids, powders or polymers. Quantity to be discussed with lab scientist. ​


    Manufacturer: Micromeritics
    Model Number: ASAP 2420
    Location: Building 3, Level 3 East

  • Analytical Chemistry Core Lab
    Solid Phase


    AutoChem 2920_acl

    ​Dynamic  chemisorption method involving temperature programmed reduction (TPR), oxidation (TPO), desorption (TPD), and CO and ammonia TPD/MS ( mass spec ).


    ​Sample - solids, powders or polymers. Quantity to be discussed with lab scientist. 


    Manufacturer: Micromeritics
    Model Number: Autochem II 2920
    Location: Building 3, Level 3 East

  • Analytical Chemistry Core Lab
    Solid Phase


    AutoChem 2950_acl
    Dynamic chemisorption method involving temperature programmed reduction (TPR), oxidation (TPO), desorption (TPD), and CO and ammonia TPD/MS ( mass spec ).

    Sample - solids, powders or polymers. Quantity to be discussed with lab scientist. 


    Manufacturer: Micromeritics
    Model Number: Autochem II 2950
    Location: Building 3, Level 3 East

  • Analytical Chemistry Core Lab
    Solid Phase


    Contact Angle_acl
    Measurement of contact angle on flat solid or membrane surfaces; of temperature control surface tension of liquid samples; and of surface free energy.
    Sample - flat solids or membranes  with a minimum sample size 1 cm2.

    Manufacturer: Kruss
    Model Number: Easydrop standard
    Location: Building 3, Level 3 East

  • Analytical Chemistry Core Lab
    Solid Phase


    DIL_acl
    Dilatometer - DIL - is a technique to measure the dimension of a substance under negligible load as a function of temperature while the substance is subjected to a controlled temperature program.

    Manufacturer: Netzsch
    Model Number: 402 C
    Location: Building 3, Level 3 East

  • Analytical Chemistry Core Lab
    Solid Phase


    Fluorescence_acl
    Fluorescence spectroscopy for solid, thin film, and solution samples.
    Sample - liquids with a minimum quantity of 3mL; solids or powders 10mg; thin films 1cm2.

    Manufacturer: Varian, Inc/Agilent
    Model Number: Cary Eclipse
    Location: Building 3, Level 3 East

  • Analytical Chemistry Core Lab
    Solid Phase


    FTIR-6700_acl

    Fourier transform infrared spectroscopy - FTIR - measures MID infrared spectrum by transmission and reflection; ​​​ DRIFT, MICRO FTIR analysis (on the microscope), by trasmission and reflection.


    Sample - powders, solids, thin films, gas, liquids. DRIFT can measure solid, powder, or polymer samples. Quantity to be discussed with lab scientist.​


    Manufacturer: Thermo Scientific
    Model Number: Nicolet 6700
    Location: Building 3, Level 3 East