Water deslination equipment fitted to RV Thuwal to produce fresh water

Ramses Trios Light meter
Spectral imaging radiometer to measure radiance, irradiance, or scalar irradiance in the UV, VIS and UV/VIS ranges

Sediment trap for time series sediment sampling with 21 sample bottles.

Water sampling rosette (GO1018 mini) with 6 x 5 litre niskin sampling bottles.

Water sampling rosette (GO1018) with 24 x 10 litre niskin sampling bottles. Only deployable from the RV Thuwal back deck.

Draft: 0.34m Overall Length: 10.3m Max Persons: 12

Multiparameter sonde for water parameter measurements

300m hand spooled fibre optic ROV winch

he PACS, Portable Acoustic Command System, is a highly versatile deck unit that can be used to control and range on EdgeTech’s (formerly ORE Offshore) low frequency (LF) or medium frequency (MF) acoustic releases and transponders. The rugged, lightweight unit provides a highly intuitive user interface that allows you to go right to work, spending your valuable time in the field, not in training. The system is powered by an internal lithium ion rechargeable battery or A/C power. The PACS works with all standard EdgeTech acoustic transponding releases. See below for our acoustic transponding release products.

Multipurpose 14m Newton Research boat, with A-Frame for oceanographic deplayments and operates as science diving vessel. Draft: 2.74m Overall Length: 14m Max Persons: 12

Design almost anything with this powerful design station that comes loaded with many design software packages. (e.g. SolidWorks,Fusion360, Proteus, and others)

Design almost anything with this powerful design station that comes loaded with many design software packages. (e.g. SolidWorks,Fusion360, Proteus, and others)

The MakerBot Replicator Z18 combines an extra-large build volume with ease-of-use and connectivity features so you can go from 3D model to 3D print efficiently and easily. Optimized for MakerBot PLA filament, the Replicator Z18 can create extra-large, ultra-tall industrial prototypes, models, and products. You can also work on multiple designs at once by printing more than one file.

The 208HRD High-Resolution Sputter Coater from Cressington comprises a Rotary-Planetary-Tilting RPT Stage of variable speed settings and adjustable tilt, used in Field Emission Scanning Electron Microscopy (FESEM) imaging, where extremely thin, fine-grained, uniform coatings to eliminate charging and to improve contrast on low-density materials.
Thickness range: 0.0 - 999.9nm
Resolution: 0.1nm
Density range: 0.50 - 30.00gm/cm3
Tooling factor range: 0.25 - 8.00
Termination range: 0 - 999.9nm

Synthesized LCR/ESR Meter with Component Tester

laboratory grade synthesized function generator with arbitrary capability.

The practical and very wideband R&S HE300 active directional antenna locates transmitters and interference sources when combined with portable receivers (e.g. R&S PR100). The three exchangeable antenna modules supplied with the antenna cover the 20 MHz to 7.5 GHz frequency range. An additional module (R&S HE300HF for 9 kHz to 20 MHz) is available as an option. The modules can be plugged into the handle with the correct orientation for vertical or horizontal polarization and then mechanically locked in place.
A built-in, low-noise wideband amplifier can be activated to enhance system sensitivity (active mode).
In passive mode, the amplifier is bypassed so that the R&S HE300 can also be used in the vicinity of strong signal sources.
Two different models of the R&S HE300 are available.
Model .02 contains an analog compass for bearing determination;
Model .03 is equipped with an integrated GPS receiver and an electronic compass.
When used with the R&S PR100 portable receiver, the potential target can easily be located on a map using the triangulation feature.

Acoustic deck unit to be used with Benthos acoustic releases

CTD deck unit

CTD deck unit