Aquadopp Current Meter measure water currents at one level. The Aquadopp Current Meter, henceforth called Aquadopp, has three acoustic transducers that can be arranged in a variety of head configurations. Current meters are simple to use and appropriate when only one measurement point is required, or when measurements at great depths are of interest. The Aquadopp is available as 2 MHz systems. The Current Meters are equipped with temperature, compass, tilt and pressure sensors, and an internal battery pack that enables autonomous deployments for very long periods of time.

Salinometer, precision conductivity/salinity measurement/portable version

Salinometer, precision conductivity/salinity measurement/portable version

Portable Spectrum Analyzer 100 kHz to 8 GHz. With Preamplifier, Tracking Generator, Internal VSWR Bridge.
The R&S FSH is a handheld spectrum analyzer and depending on the model and the options installed - a power meter, a cable and antenna tester and a two-port vector network analyzer. It provides the three most important RF analysis functions that an RF service technician or an installation and maintenance team needs to solve daily routine measurement tasks. For example, it can be used for maintaining or installing transmitter systems, checking cables and antennas, assessing signal quality in broadcasting, radiocommunications and service, measuring electric field strength or in simple lab applications. The R&S FSH can perform any of these tasks quickly, reliably and with high measurement accuracy.
Weighing only 3 kg, the R&S FSH is a handy instrument.
All frequently used functions have their own function keys and are within fingertip reach. The brilliant color display is easy to read even under poor lighting conditions, and it has a monochrome mode for extreme conditions.
The capacity of the R&S FSH battery enables uninterrupted operation for up to 4.5 hours. The battery is changed within seconds. And if it rains No problem - all connectors are splash-proof.

Ultra-versatile SEM with unique environmental capability. Quattro ESEM combines imaging and analytical capabilities with the environmental mode (ESEM™) that allows samples to be studied in their natural state. It is ideal for a wide variety of materials and disciplines. Quattro is a FEG SEM with an excellent resolution, while its three vacuum modes (high vacuum, low vacuum, and ESEM) provide the flexibility to accommodate the widest range of samples of any SEM available, including samples that are outgassing or otherwise not vacuum-compatible.

Confocal Raman instrument equipped with 6 different lasers (nm) 325, 473, 532, 633, 785 and 1064, it has three different high efficient detectors for routing Raman and PL signal. Allows doing 2D Raman imaging.
Experiments can be performed: Raman, Raman imaging, Photoluminescence (PL), Kinetic Raman, Surface Enhanced Raman Spectroscopy, Raman Resonance Spectroscopy , Photocurrent measurements, Temperature dependent PL and Raman, High resolution Raman and Oil-dipping techniques.

The FINEPLACER is a fully automated, sub-micron bonding platform for advanced packaging and optoelectronic applications.
It is used for the following applications:
-Laser diode bonding.
-LED bonding.
-Micro optics assembly.
-MEMS packaging.
-Sensor packaging.
-Wafer level packaging
-Chip on glass, chip on flex.
-Flip chip (face down).
-Die bonding (face up)

Keithley 4200-SCS is a modular, fully integrated parameter analyzer that performs electrical characterization of materials, semiconductor devices and processes. From basic I-V and C-V measurement sweeps to advanced ultra-fast pulsed I-V, waveform capture, and transient I-V measurements, the 4200-SCS provides the researcher or engineer with critical parameters needed for design, development or production.

The D8 DISCOVER is an all purpose X-ray analyzer family which can be configured for all X-ray diffraction- and scattering-based material research applications, including qualitative and quantitative phase analysis, structure analysis, high-resolution X-ray diffraction, reflectometry, reciprocal space mapping, gracing incidence diffraction (in-plane GID), gracing incidence small angle X-ray scattering (GISAXS), stress and texture analysis, and micro-diffraction, depending on accessories.
The proposed set-up enables researchers to perform in-situ X-ray diffraction studies of gas-solid interaction, the characterization of battery and also enables a state-of-the-art characterization technique called pair distribution function analysis (PDF). The set-up has three main components:
1) a powder diffractometer fitted with a high energy source (Mo Kalpha, 17.5 keV), two high sensitivity detectors (transmission and reflection geometry) and focusing X-ray optics (monochromator and mirrors).
2) a high pressure/high temperature cell connected to a high pressure gas delivery system. The ensemble is compatible with a variety of gases including flammable and toxic gases.
3) a battery device for punch cell characterization (transmission) allowing the simultaneous measurement of cathode and anode during charge/discharge cycle and also including a heating cooling module.

950 Liter autoclave to sterilize transgenic soil and plant material & biohazardous (organic) waste before final disposal

Xenon Difluoride (XeF2) based vapor phase etch system is used for isotropic and selective etching of silicon. The XeF2 reaction is purely chemical and spontaneous. Being vapor phase etchant, XeF2 avoids many issues associated with wet processing especially stiction. It has a very high selectivity of silicon to photo-resist, silicon dioxide, silicon nitride and aluminum. The Xactix X3 is a dual expansion chamber design which allows high XeF2 gas flows and pressure which in turn leads to a high etch rate without dilution from carrier gases.

Wafer – Silicon, germanium, molybdenum, titanium, tantalum, do not include liquids or powders. Wafer diameter up to 8-inch can be accommodated. ​

The 10x Chromium Controller is designed to partition thousand of cells in a few minutes, thus allowing researchers to define biological processes at the cellular level.
Applications: Stem Cell Biology, Tumor Heterogeneity, Rare Cell Detection, Immunology.
Samples: cells from live or frozen cultures with a maximum diameter of 60 microns

Determination of C,H,N,O content of sample in given matrix determination of total carbon, total organic carbon, hydrogen, nitrogen, sulphur and oxygen.
Sample - solids, oil (heavy oil, viscous) or sediments, with a minimum quantity of 10 mg.

The ProtoMAX® can cut through nearly any material including: aluminum, titanium, stone, carbon fiber, and G10 composite. The compact machine footprint combined with its comprehensive versatility makes the ProtoMAX an ideal abrasive waterjet for prototyping, educational applications, or as a complement to a larger machine shop. The pump and cutting table are on casters for easy relocation. Work material is submerged under water for quiet cutting that won’t disrupt your work space.
Technical Specs
Machine Dimensions
Footprint * – (L x W) 1,054 mm x 1,004 mm
Height ** 1,435 mm
Weight (tank empty) 272 kg
Work Envelope
X-Y Cutting Envelope *** 304 mm x 304 mm
Z-Axis Travel *** 25 mm
Table Size – (L x W) 368 mm x 393 mm
Standard Model Specifications
Speed 2,540 mm/min
Linear Positional Accuracy ±0.1270 mm
Repeatability ±0.0762 mm
Max. Supported Material Load 244 kg/m2

The Filmetrics F40-UVX is a tabletop instrument to measure the thickness and optical constants (n and k) of transparent thin films with a wavelength range of 190-1700nm. It comes with an integrated color video camera that allows exact monitoring of the film thickness measurement spot.
Thickness Range: 4nm - 120µm (Material and objective dependent)
Wavelength Range: 190-1700nm

ROTARIS is an 8-inch fully automatic nano-coating PVD platform for R&D of ultrathin magnetic films. It includes three process modules: CPM for ultra-thin metal oxidation and wafer pre-clean, sTPM for ultrahigh vacuum annealing, and RSM for ultrathin film deposition with in-situ aligning magnetic field. It is capable of depositing ultra-thin metallic and insulation layers down to 1 nm with very precise thickness control. NCL provides a number of frequently used targets like Co, CoFe, CoFeB, IrMn, MgO, HfO2, W, Au, Pt, Ru and Ta.
Sample - 8 inch silicon wafer.

Minus 80 freezer

Minus 80 freezer

Minus 80 freezer

The Q300R T is a large chamber, rotary-pumped coating system ideally suited for sputtering a single large diameter specimen up to 8"/200mm (eg a wafer), or multiple smaller specimens over a similar diameter. The system is designed to sputter non-oxidising (noble) metals – e.g. gold (Au), Silver (Ag) and Copper (Cu) and is fitted with three individual sputtering heads to ensure even sputtering deposition over a large diameter.