Nanofabrication Core Lab
Cleanroom
LIT-026 Obducat Nanoimprint
The EITRE® 3 Nano Imprint Lithography (NIL) tool offers a semi-automated and affordable lithography solution, allowing pattern replication in the micro- and nanometer range with full area imprint for a variety of imprint processes to be used.
Substrate Size ≤ 78 mm Ø
Imprint Pressure (minimum) 6-8 bar (depending inlet pressure on CA)
Imprint Pressure (minimum) 6-8 bar (depending inlet pressure on CA)
Imprint Temperature (minimum) Ambient temperature
Imprint Temperature (maximum) 250°C (200°C with UV Module)
Obducat Technologies
EITRE® 3
Coastal and Marine Resources Core Lab
Engineering Services
Midas CTD Plus Multiparameter - 405
CTD Profiler. High accuracy sensors (including 0.01% pressure) and robust titanium design allow reliable operation to 2000m depth,
DO,PH, PAR, Redox, Turbidity
Valeport
CTD+
Building 27,
Level 2
Coastal and Marine Resources Core Lab
Engineering Services
Midas CTD Plus Multiparameter - 981
CTD Profiler. High accuracy sensors (including 0.01% pressure) and robust titanium design allow reliable operation to 500m depth,
in addition DO, Ph, Redox, Turbidity
Valeport
Valeport
Building 27,
Level 2
Coastal and Marine Resources Core Lab
Engineering Services
Oscilloscope
OSCILLOSCOPE; DIGITAL STORAGE, 200 MHZ, 2 GS/S, 4-CH, COLOR DISPLAY
TBD
TBD
Building 27,
Level 2
Coastal and Marine Resources Core Lab
Engineering Services
Semiconductor Device Analyzer
all-round semiconductor characterization from basic to cutting-edge applications. It provides a wide range of measurement capabilities to cover the electrical characterization and evaluation of semiconductor material and devices, active/passive components, or virtually any other type of electronic device with uncompromised measurement reliability and efficiency
Agilent
B1500A
Building 27,
Level 2
Coastal and Marine Resources Core Lab
Marine Operations
Multinet
Multinet_cmor
The Multinet is deployed with all net bags closed and the water flowing freely through the frame. The instrument can be lowered with high speed to the greatest desired depth. It can either be operated by use of communication cable and deck unit and nets can be opened manually or it can be used off-line by pre-programming it as described below. All measuring data are stored inside the internal data memory during the operation and can be read out by a PC when the Multinet is back on board.
Hydrobios
438 multinet
Building 27,
Level 2
Coastal and Marine Resources Core Lab
Marine Operations
Gravity Corer
Gravity Corer_cmor
The gravity corer is the standard coring system that consists of a head weight (1.5 t) connected to a variable number of 3 m long steel barrels (diameter 12 cm). Plastic tubes are inserted into the barrels and are attached to these by a core catcher fitted inside the end of the lowest barrel.
KC Denmark
13.100B
Building 27,
Level 2
Coastal and Marine Resources Core Lab
Engineering Services
Rosette Medium 12P
Water Sampling Rosette, connected to seabird CTD 9Plus (SN: 09P71454 - 1158)
Sea Bird
Building 27,
Level 2
Coastal and Marine Resources Core Lab
Engineering Services
Rosette Big 12P
Water Sampling Rosette, connected to seabird CTD 9 Plus, (SN: 09P71454 - 1157)
Sea Bird
32
Building 27,
Level 2
Coastal and Marine Resources Core Lab
Marine Operations
In Line Niskin
Water sampling Niskin. Please specify Niskin volume.
General Oceanics
Various
Building 27,
Level 2